Routing Settings; Advanced Routing Settings; Setting The Device Tones; Geocaching Settings - Garmin GRN-010-02088-01 Owner's Manual

Routing Settings

The available routing settings vary based on whether Direct Routing is enabled or disabled.
Select Setup > Routing.
Direct Routing: Enables or disables direct routing. Direct routing calculates the most direct route possible to the
destination.
Activity: Sets an activity while routing. The device calculates routes optimized for the type of activity you are
doing.
Lock On Road: Locks the blue triangle, which represents your position on the map, onto the nearest road. This is
most useful when driving or navigating on roads.
Course Navigation: Sets the method used to calculate courses and routes. The Direct Path option is used for
point-to-point navigation without recalculation. The Roads & Trails option adjusts the course to follow map
data, recalculating as needed.
Route Transitions: Sets how the device routes from one point on the route to the next. This setting is available
only for some activities. The Distance option routes you to the next point on the route when you are within a
specified distance of your current point.
Advanced Setup: Allows you to customize additional routing settings

Advanced Routing Settings

Select Setup > Routing > Advanced Setup.
Calculation Method: Sets the method used to calculate your route.
Off Route Recalculation: Sets recalculation preferences when navigating away from an active route.
Avoidance Setup: Sets the types of roads, terrain, and transportation methods to avoid while navigating.

Setting the Device Tones

You can customize tones for messages, keys, turn warnings, and alarms.
1 Select Setup > Tones.
2 Select Sounds.
3 Select an option:
• To enable both tones and vibration, select Tone & Vibration.
• To enable only tones, select Tone.
• To enable only vibration, select Vibration.
4 Select Volume to set the tone volume.
5 Select a tone for each audible type.

Geocaching Settings

Select Setup > Geocaching.
Geocaching Live: Allows you to remove live geocache data from your device and remove your device
registration from geocaching.com
Device Registration From Geocaching.com,
Geocache Style: Sets the device to display the geocache list using names or codes.
chirp™ Searching: Allows the device to search for a geocache containing a chirp accessory
Searching, page 31).
Program chirp™: Programs the chirp accessory.
Filter Setup: Allows you to create and save custom filters for geocaches
page 30).
Found Geocaches: Allows you to edit the number of geocaches found. This number automatically increases
when you log a find (Logging the Attempt,
36
(Removing Live Geocache Data from the Device,
page 31).
page 31).
(Advanced Routing Settings,
page 31,
(Enabling chirp
(Saving a Custom Geocache Filter,
Customizing the Device
page 36).
Removing Your