Aviationvac Introduction - Pro-Team AviationVac Operating Manual

INFORMATION ON PAGES 7-12 PERTAINS ONLY TO:
AviationVac
INSPECTION
The equipment detailed in this manual is specifically designed for use on air planes
with 110VAC – 120VAC, 400Hz service for connecting such appliances.
Carefully unpack and inspect your new ProTeam vacuum for shipping damage. Each
unit is tested and thoroughly inspected before shipping. For instructions regarding
any shipping damage, contact your local ProTeam distributor.
This operator's manual has important information for the use and safe operation of
the vacuum cleaners detailed in this manual. Read this manual carefully before start-
ing the machine. Keep this manual available at all times and instruct all operators to
read this manual. If instructions are not followed, an injury may occur or equipment,
furniture or buildings may become damaged.
The contents of this manual are based on the latest product information available at
the time of publication. ProTeam reserves the right to make changes or improvements
to its machines or components without notice.
The products that are covered by this instruction manual are intended for commercial
use.
WARNINGS
• USE ONLY genuine ProTeam replacement filters to ensure optimal performance,
improved indoor air quality and maintain a valid vacuum warranty.
• DO NOT vacuum with a frayed, worn, or damaged cord.
• DO NOT vacuum liquids or expose the vacuum to rain or water. The vacuums in
this manual are for dry use only and are not to be used or stored outdoors in wet
conditions.
• DO NOT vacuum hazardous dust or toxic materials.
• DO NOT use vacuums to pick up flammable or combustible materials and do not
store them in the filter bay.
The equipment detailed in this manual is not intended for use by persons (including
children) with reduced physical, sensory, or mental capabilities, or lack of experience
and knowledge, unless they have been given supervision or instruction concerning
use of the equipment by a person responsible for safety.
MOTOR
Electric thru-flow vacuum motors must never be used in applications in which wet or
moist conditions are involved, where dry chemicals or other volatile materials are pres-
ent, or where airflow may be restricted or blocked. Such motors are designed to per-
mit the vacuumed air to pass over the electrical wiring to cool it. Therefore, any liquid
(including water), dry chemical, or other foreign substance which would come in con-
tact with electrical conductors could cause combustion (depending on volatility) or
electrical shock. Failure to observe these precautions could result in property damage
and severe personal injury, including death in extreme cases.
ProTeam
INTRODUCTION
7