Pro-Team AviationVac Operating Manual page 13

PREVENTATIVE MAINTENANCE
ELECTRICAL CORD CARE
NEVER stretch the cord tightly between the vacuum and the
outlet. A cord that is stretched or pulled will not function
properly and creates a danger.
After vacuuming, unplug the extension cord at both ends
and wind it up loosely (Figure A). DO NOT wind the cord
up by wrapping it around your hand and elbow. Acceptable
extension cord types are 16AWG, SJT or SJTW in 50 ft. or less
or 14AWG, SJT or SJTW in 50 ft. to 100 ft. lengths. ProTeam
will not be liable for damage to equipment or personnel if a
cord that does not meet the above requirements is used.
Figure A
If the supply cord is damaged, it must be replaced by a
special cord or assembly available from ProTeam, its service
agent, or similarly qualified persons in order to avoid a hazard.
PROPER STORAGE
When the vacuum is not in use, the vacuum and extension cord, if applicable, should
be stored indoors and in a dry place.
ProTeam 11