Operating/Proper Vacuuming Motion For Large Areas - Pro-Team AviationVac Operating Manual

BACKPACK VACUUMS
Figure L
Figure N
Figure P
PROPER VACUUMING MOTION
FOR LARGE AREAS
1. Begin with the wand parallel to your body.
2. Draw the top of the wand in toward your waist and twist at the
waist walking backward or forward, in a side-to-side motion
(Figure R). The motion is similar to mopping and keeps the upper
body and arms from tiring.
16
Figure M
Figure O
Figure Q
OPERATING THE
BACKPACK VACUUM
13. Thread the extension cord
through the Cord-O-Holder
on the waistbelt (Figure L).
14. Do not tie extension cord and
power cord together. Doing
so will result in damage to
both cords and will not be
covered under warranty
(Figure M).
15. Fasten the ends of the wands
together, snapping them into
place (Figure N).
16. Attach the floor tool to end of
wand. Align the brass ring
with the indentation on the
floor tool to ensure a secure
fit (Figure O).
17. Twist the wand onto the end
of the hose (Figure P).
18. Plug the power cord into the
wall. Turn the unit on, and
proceed with vacuuming.
19. The on/off switch is
conveniently located on the
waist belt of the backpack
vacuums (Figure Q).
20. The QuietPro BP has a
different power switch.
Use the power switch to
choose one of the following
power modes.
• POWER MODE (HI) mode
provides better performance.
• QUIET MODE (LO) mode
provides quieter operation.
Figure R
ProTeam