FujiFilm Apeos 3570 Reference Manual page 13

How to determine the reduction rate

If [Original Size] is [Auto Detect] and [Zoom Mode] is [Paper Size]
Reduction rate is determined by the drawn object area and [Paper Size]. Hard Clip area is [Paper].
 If Auto Layout is [Auto Layout], the document is placed at the center of the paper.
 If the starting point is the bottom left or center, the starting points of the document and paper are
aligned.
 If the reduction rate is less than 22.5% (such as A0 -> A5), it will be the actual size.

If [Original Size] is [Auto Detect] and [Zoom Mode] is [Coordinate Area]
Reduction rate is determined by the starting point of the drawn object area and paper size. Hard Clip
area is [Normal].
Maximum scale value is 210.0%, and the minimum scale value is 22.5%.
Paper
size
Minimum value
P2x -
P1x
A3 7829
A4 5485
A5 3828
JIS B4 6762
JIS B5 4723
Unit : Plotter unit
0°
Maximum value
P2y - P2x -
P1y P1x
5485 73075
3828 51200
2648 35733
4723 63120
3297 44088
Minimum value
P2y - P2x -
P1y P1x
51200 5485
35733 3828
24720 2648
44088 4723
30773 3297
90°
Maximum value
P2y - P2x -
P1y P1x
7829 51200
5485 35733
3828 24720
6762 44088
4723 30773
2.1 Emulation
P2y -
P1y
73075
51200
35733
63120
44088
13