FujiFilm Apeos 3570 Reference Manual page 52

Error Code
081, 091
110, 202, 704
122
201
301
302, 303, 304
307, 308, 308, 309, 404,
500, 600, 707, 900 to 999
401, 706
702
705
710
711
801, 802
1002, 3061
3060, 3065
3062
3063
3064
52
2 Appendix
Check if the LDAP server used for Login to Remote Accounts is set up
correctly.
Check the Active Directory server is powered on.
Check the Active Directory settings.
Check that the device is connected to a network.
Register again from the beginning.
Check the user ID, and then enter it again.
Enter the ID and password again.
Check the following and register again from the beginning.
Set a password between 4 and 12 characters. If you do not wish to

set a password, leave the field blank.
Set a user ID within 32 single-byte characters.

Set an e-mail address comprising of alphanumeric characters and

symbols within 128 characters in total.
Request to your system administrator to delete the user information,
and then register again.
Restart the machine.
If the error still is not resolved, contact our sales representative or
Customer Contact Center.
Ask the system administrator the initial settings.
Request to the smart card administrator to check your smart card.
Log out with the Log In/Out button.
Request to your system administrator to check the authentication
settings.
Change the user ID.
Contact our sales representative or Customer Contact Center.
Log out with the Log In/Out button and try again.
Wait for a while, and then try again.
Log out, hold up the Smart Card, and launch the Smart Card
Registration.
Ensure that the multifunction device is not running a job or an interrupt
is not outstanding, and try again.
Log in as the system administrator and start the Smart Card
Registration again.
Remedy