Reprinting Pages After Fault Condition - Printronix L5020 User Manual

Reprinting Pages After Fault Condition

If any data resides in the print buffer, it is then printed. Press
ONLINE to place the printer online.
Errors requiring field service are printer failures that require the
attention of service personnel. Before calling your service
representative, press CLEAR to attempt to remove the message
from the display. If the message disappears, the original message
may have been a false error indication. If the message reappears,
call for service.
Errors requiring reprinting are those errors which require reprinting
to recover from an error condition. These are discussed in detail in
the following topics.
Reprinting Pages After Fault Condition
The printer handles errors in three ways, depending on your
configuration of the Reprint on Fault option in the Paper Control
menu.
If Reprint On Fault Is Enabled (The Default):
Any pages left in the printer at the time of failure are reprinted. No
data is lost.
The printer reprints all pages that have not completely exited the
printer at the time of failure. The exact number of pages that are
reprinted is determined by the length of the page and where within
the page the fault occurred.
If Reprint On Fault Is Disabled:
Any pages left in the printer at the time of failure are not reprinted.
Data is lost (you need to reprint the lost pages according to your
application software).
If Reprint On Fault Is Confirm:
The control panel on the printer returns a message asking whether
or not to reprint. Answer Yes to reprint, answer No if a reprint is not
necessary.
183