Table of Contents
Advertisement
Chapter 2
Using The Control Panel
LINE SYNC
Twinax interface only. Indicates there is activity on the line from the
host computer.
SYS AVAIL
Twinax interface only. Indicates there is activity to the current
address on the line.
JOB IN PROCESS
When the printer is receiving data or processing data, JOB IN
PROCESS flashes. If data has been processed and is waiting to be
printed, or has been printed but not yet fused and ejected by the
printer, JOB IN PROCESS lights continuously.
JOB IN PROCESS does not light when the printer is not processing
data, no data exists in the buffer, and the printer is not receiving
data.
STAND BY
IMPORTANT
Do not press any control panel key when STAND BY is
flashing. The printer may carry out unwanted commands.
STAND BY flashes while the printer is executing any control panel
command, and while the printer is unavailable for printing due to its
normal system activities, such as booting, printing its configuration,
writing status information, and loading applications.
ONLINE
ONLINE is lit continuously when the printer is online (when the
printer is ready to print and accept data from the host). It flashes
when the printer is offline or when the printer stops because of an
error.
FAULT
FAULT flashes when the printer is unavailable for printing because
of an internal error.
36
Advertisement
Table of Contents
