Table of Contents
Advertisement
13. Poor penetration
14. Excessive penetration
WEEE REGULATIONS
Dispose of this product at the end of its working life in compliance with the EU Directive on Waste Electrical and Electronic Equipment
(WEEE). When the product is no longer required, it must be disposed of in an environmentally protective way. Contact your local solid
waste authority for recycling information.
ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to
a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely
unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids
according to local regulations.
Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior
notice. Please note that other versions of this product are available. If you require documentation for alternative versions, please email or call
our technical team on technical@sealey.co.uk or 01284 757505.
Important: No Liability is accepted for incorrect use of this product.
Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.
Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757500
© Jack Sealey Limited
Weld current too low
Arc too long
Weld current too high
Weld speed too slow
incorrect distance of torch to
workpiece
01284 703534
Original Language Version
Increase power and wire speed. (Section 4)
Bring torch closer to workpiece
Decrease power and wire speed. (Section 4)
Move torch faster
Torch distance should be 8-10mm
sales@sealey.co.uk
www.sealey.co.uk
Supermig180.V4 Issue:1
23/03/22
Advertisement
Table of Contents
