RCD together with portable products that are plugged into an electrical supply not protected by an RCCB. If in doubt consult a professional electrician. You may obtain a Residual Current Device by contacting your Sealey dealer. You must also read and understand the following instructions concerning electrical safety.
When you have completed welding, remove the torch and store in a safe, dry place. Note: Damaged torches and cables are not covered under warranty. Fig.5 Fig.6 SUPERMIG150.V2, 160.V2, 180.V2 - 1 - 23/12/03...
IMPORTANT: BEFORE YOU COMMENCE, MAKE SURE THE MACHINE IS SWITCHED OFF AT THE MAINS. IF WELDING A CAR, DISCONNECT THE BATTERY OR FIT AN ELECTRONIC CIRCUIT PROTECTOR. WE RECOMMEND THE USE OF SEALEY PROSAF/12V OR 24V IN ORDER TO PROTECT SOPHISTICATED ELECTRONICS.
To keep the contact tip free from spatter, we recommend the use of Sealey anti-spatter spray (MIG/722307) available from your Sealey Dealer. We also recommend that you keep spare tips and gas cups in stock.
EMC Directive (S.I. 1992/2372 & Amendments). 89/336/EEC For Jack Sealey Ltd. Sole importer into the UK of Sealey Power Welders TORCH PARTS LIST FOR MODELS: SUPERMIG 150.V2, 160.V2, 180.V2 (Please note that the torch for Supermig 180.V2 has a longer cable group & black liner.)
Need help?
Do you have a question about the SUPERMIG150.V2 and is the answer not in the manual?
Questions and answers