Yamaha GRIZZLY YFM70GPAN Owner's Manual page 36

EBU39181
Winch switch "OUT/IN" (equipped models)
This switch is used when operating the winch
(page 5-27). Read this manual and the Winch
Owner's Manual completely before operating the
winch switch.
EBU18192
Override switch "OVERRIDE"
Top speed is normally limited when operating in
differential gear lock. If conditions require more
5
engine power when riding forward, push and hold
this switch to override the differential gear lock
speed limiting function. (See page 5-13.) Releas-
ing the switch restores the speed limiting function.
While the override switch is pushed, the segments
of the speedometer digits will appear as shown in
the figure.
TIP
If the digits of the speedometer appear as shown
when the switch is NOT being pushed, this could
indicate a malfunction in the electrical system. In
this case, take the ATV to a Yamaha dealer at the
first opportunity.
EWB00151
WARNING
Always ride at a slow speed when the ATV is in
four-wheel-drive differential gear lock, and al-
low extra time and distance for maneuvers.
All wheels turn at the same speed when the dif-
ferential is locked, so it takes more effort to
turn the ATV. The effort needed to turn increas-
5-12