Yamaha GRIZZLY YFM70GPAN Owner's Manual page 35

2WD
4WD
3 1
1. On-Command drive switch "2WD/4WD"
2. On-Command drive switch "4WD/LOCK"
3. Drive switch lock lever
EBU18081
Engine stop switch "
Set this switch to " " before starting the engine.
The engine stop switch controls the ignition and
stops the engine when it is running. Use this
switch to stop the engine in an emergency situa-
tion. The engine will not start or run when this
switch is set to " ".
LOCK
4WD
2 3
/ "
EBU18102
Start switch " "
Push this switch to crank the engine with the start-
er. See the starting instructions on page 7-1 prior
to starting the engine.
EBU34123
Light switch "
Set this switch to "
headlights (low beams) and the taillight. Set the
switch to " " to turn on the left and right head-
lights (high beams), the handlebar-mounted light ,
and the taillight. Set the switch to "OFF" to turn off
all the lights.
ECB00046
NOTICE
Do not use the headlights with the engine
turned off for an extended period of time. The
battery may discharge to the point that the
starter will not have enough power to crank the
engine. If this should happen, remove the bat-
tery and recharge it. (See page 9-52.)
5-11
/ /OFF"
" to turn on the left and right
5