Coolant - Yamaha GRIZZLY YFM70GPAN Owner's Manual

4. Install the drain bolt and its new gasket, and
then tighten the bolt to the specified torque.
Tightening torque:
Differential gear oil drain bolt:
9.8 N·m (0.98 kgf·m, 7.2 lb·ft)
5. Refill with the recommended differential gear
oil to the brim of the filler hole as shown.
NOTICE: Be sure no foreign material en-
ters the differential gear case.
1. Differential gear oil filler bolt
2. Gasket
3. Differential gear oil
4. Correct oil level
6. Check the oil filler bolt gasket for damage,
7. Install the oil filler bolt and its gasket, and then
[ECB00412]
8. Check the differential gear case for oil leak-
EBU23473

Coolant

1 2
The coolant level should be checked regularly. In
3
addition, the coolant must be changed at the in-
tervals specified in the periodic maintenance
chart.
4
9-29
Recommended differential gear oil:
See page 11-1.
and replace it if necessary.
tighten the bolt to the specified torque.
Tightening torque:
Differential gear oil filler bolt:
23 N·m (2.3 kgf·m, 17 lb·ft)
age. If oil is leaking, check for the cause.
9