Audiovox PRO9801i Owner's Manual page 15

5 button remote start security system with plug-in shock sensor & starter disable
Table of Contents

Advertisement

When ever the vehicle is operated from the two way transmitter, the unit will
beep responsive to the function executed at the vehicle. 1 beep when armed, 2
beeps when disarmed, etc... at times It may be inconvenient or
too noisy to hear the beep tones, so the system allows you to
set the unit for vibrate mode. To toggle on or off beep tones/
vibrate, Simultaneously press the "F" and unlock buttons. The
icons shown left will appear in the upper left hand corner of the
screen to indicate vibrate.
If the alarm system has been triggered, the icon displayed on the transmitter
LCD will indicate which zone has been activated, as well sound the beep
tones, or vibrate dependent upon the setting as shown above. The following
trigger patterns will be displayed.
Triggered and the entry attempt was made to one of the
vehicle Doors.
Triggered and entry attempt was made to the vehicles Hood
or
Trunk.
Triggered and entry attempt was made to the vehicles glass, or
the vehicle has been hit or bumped hard enough to cause a
response from the vibration detector.
ADDITIONAL ICONS THAT MAY BE DISPLAYED ARE:
If the arm/disarm chirp tones have been turned off at the vehicle, when you arm, or
disarm, the display will indicate this as shown and there will be no arm/disarm
chirps at the transmitter. This is true if the transmitter is set for vibrate mode.
When the vehicle is armed, and a door is opened, or ajar, the
transmitter will chirp 3 times, the lights will flash, and the display
will indicate a door trigger as shown on the previous page. When
the door is closed or the zone clears, the transmitter will chirp 1
time, and the display will clear.
When the vehicle is armed, and the hood or trunk, is opened or ajar, the transmit-
ter will chirp 3 times, the lights will flash, and the display will indicate a hood or
trunk trigger as shown on the previous page. When the hood or trunk is closed, or
the zone clears, the transmitter will chirp 1 time, and the display will clear.
Page 15
128-8712
15 of 24

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pursuit series

Table of Contents