ETI PI-800-GEN2 Instruction Manual page 22

Electrical Test Instruments PI-800 GEN2 and PI-1600 GEN2
preset value is set in CYCLES time base.
SERIAL port: This standard serial port may be connected to a printer, computer, or
other device to print or store time and current values of test results in ASCII format. It
is set for 9600 baud, 8 bits, 1 stop bit, no parity, no flow control. This information is sent
at the end of each test, or by pressing the Stop and Reset keys.
Report Generator Software Option: we also offer a software package for a Windows
based computer that takes the data from the serial port and inserts time and current
values into an excel document. Must have Microsoft office installed for this software to
function properly. This can be custom tailored to your excel document or use the ge-
neric document that is provided with the software
Copyright© 1994-2021 Electrical Test Instruments, LLC. All Rights Reserved
III-9