Switching The Unit On And Off; Controlling The Luminaire; Power Bank - walser GLAM Series Instruction Manual

8.1 Switching the unit on and off

1. To switch the unit on, press the On/Off/Menu button (5) for 3 seconds
(23316) or for 2 seconds (23317).
2. The luminaire switches on at 3,200 K and 1% (23316) or 5% (23317)
power the first time it is used.
3. To switch it off, press the button for the same length of time.

8.2 Controlling the luminaire

1. Press the On/Off/Menu button (5) briefly and repeatedly to toggle
between the colour temperature and brightness settings.
2. An arrow on the display indicates which of the values you can now set.
3. Use the dial (6) to set the desired value.
4. The brightness jumps in 5% steps, the colour temperature in
100 K steps.

8.3 Power bank

The battery of the luminaire can also be used as a power bank. For this
purpose, the luminaire has a USB-C output (23316) / a USB-C output and
a USB-A output (23317), to which a corresponding charging cable can be
connected. Please note:
■ While the luminaire is charging its own battery, it cannot be used
as a power bank.
■ At high charging levels, the luminaire can be used as a power bank and
as a luminaire at the same time. At medium charge levels, the maximum
illumination brightness is limited when the luminaire is used as a
power bank.
■ At low charge levels, no more illumination is available when the
luminaire is used as a power bank.
EN
29