Operation With The Remote Control (Glamluxer M Only) - walser GLAM Series Instruction Manual

8.4 Operation with the remote control (GlamLuxer M only)

ON/OFF switch
Increase colour temperature
Decrease brightness
Brightness 25%
Colour temperature 3,200 K
Colour temperature 5,600 K
8.4.1 Switching the unit on/off by remote control
1. Press the ON / OFF switch of the remote control once briefly to switch
on the luminaire.
2. Press the ON / OFF switch of the remote control again to switch off
the luminaire.
8.4.2 Setting the brightness
1. Press the ON / OFF switch of the remote control once briefly to switch
on the luminaire.
2. Increase the brightness of the luminaire by pressing the Increase
brightness button.
3. Decrease the brightness of the luminaire by pressing the Decrease
brightness button.
4. The brightness can be adjusted in 1% steps from 5 to 100%.
5. The selected values are immediately accepted and stored by the unit.
6. The lamp can also be set to a pre-programmed brightness (25%; 50%;
100%). To do this, press the corresponding buttons – Brightness 25%,
Brightness 50% or Brightness 100% – on the remote control.
30
100%
Increase brightness
Brightness 50%
25% 50%
3200K 4300K
5600K
Brightness 100%
Decrease colour
temperature
Colour temperature
4,300 K