Table of Contents
Advertisement
Available languages
Available languages
NOTICE
Only connect the power supply unit to a protective earthed socket.
8.
Operation and handling of the unit
Display
ON/OFF switch
Selection button
RGB colour/colour
temperature
8.1 Switching the unit on / off at the unit
• Switch on the unit with the ON/OFF switch (10).
• The luminaire is ready for operation.
NOTICE
Please note that the luminaire will not function if the batteries are not sufficiently charged!
8.2 Adjusting the brightness (dimming function) on the unit
1. Switch on the unit with the ON/OFF switch (10) (if not already done)
2. By default, the dimming function for brightness adjustment is preset after switching
on the light.
3. You can adjust the brightness (dimming function) by pressing the multifunction
push/turn switch (4).
4. Turn the multifunction push/turn control (4) to set the desired brightness continuously.
5. The selected brightness level is shown on the display (5)
6. The luminous intensity is adopted by the unit immediately after turning the selector wheel.
7. The luminosity can be adjusted in increments of 1, from 1 to 100%
8.3 Setting the colour temperature on the unit
1. Switch on the unit with the ON/OFF switch (10) (if not already done)
2. By pressing the RGB colour/colour temperature selection button (11) twice, you can adjust
the colour temperature.
3. The colour temperature can be adjusted in increments of 10 from 3,200 to 5,600 Kelvin.
4. Turn the multifunction push/turn control (4) to set the desired colour temperature.
5. The selected colour temperature is shown in the display (5).
6. The new value for the colour temperature is adopted by the unit.
8.4 Setting the RGB colour tone on the unit
1. Switch on the unit with the ON/OFF switch (10) (if not already done)
2. By pressing the RGB colour/colour temperature selection button (11) once, you can adjust
the colour temperature.
26
Multifunctional
Push-turn switch
(selector wheel)
Advertisement
Table of Contents
