Transporting And Storing The Unit - walser GLAM Series Instruction Manual

8.4.3 Setting the colour temperature
1. Press the ON / OFF switch of the remote control once briefly to switch
on the luminaire.
2. Increase the colour temperature of the luminaire by pressing
the Increase colour temperature button.
3. Decrease the colour temperature of the luminaire by pressing
the Decrease colour temperature button.
4. The colour temperature can be adjusted in increments of 100 from
3,200 to 5,600.
5. The selected values are immediately accepted and stored by the unit.
6. The lamp can also be set to a pre-programmed colour temperature
(3,200 K; 4,300 K; 5,600 K). To do this, press the corresponding
buttons – Colour temperature 3,200 K, Colour temperature 4,300 K
or Colour temperature 5,600 K – on the remote control.
9.

Transporting and storing the unit

1. Switch off the unit.
2. If necessary, allow the unit to cool down completely.
3. Clean the unit if necessary (see chapter 11).
4. Place the unit and all dismantled elements in the bag or item packaging
and transport or store them in accordance with the specifications in the
technical data (see chapter 13).
EN
31