Related Manuals for Preh MC12T4
Summary of Contents for Preh MC12T4
- Page 1 Preh Touch Commander Preh Screen Commander User Manual and Technical Data MC12T4...
-
Page 2: Table Of Contents
Technical Data _________________________________________________ 17 Safety Issues __________________________________________________ 19 Further Information _____________________________________________ 20 10 Warranty ______________________________________________________ 20 11 Statement of Confirmation _______________________________________ 20 12 FCC Warning Statement _________________________________________ 21 Table of Contents subject to change without prior notice Preh KeyTec GmbH, www.preh-keytec.com 05.2004... - Page 3 LC-Display (12,1”) with touch interface or monitor glass swinging direction loudspeaker ON/OFF switch audio cable subject to change without prior notice Preh KeyTec GmbH, www.preh-keytec.com Volume regulator VGA connector serial connector RS 232 (touch controller) supply voltage connector (main power) 05.2004...
- Page 4 Pict. 6: bottom view LC-Display (12,1”) with touch interface or monitor glass swinging direction Magnetic Card Reader (Optional) Base Cover Module subject to change without prior notice Preh KeyTec GmbH, www.preh-keytec.com VGA Connector Power Supply Serial Connector RS 232 (Touch Controller) 05.2004...
- Page 5 Pict. 8: rear view I Pict. 9: rear view II (bracketry) Menu/Exit button Up button Down button Select button subject to change without prior notice Preh KeyTec GmbH, www.preh-keytec.com LC-Display (12,1”) with touch surface or monitor glass VGA connector (15 pol.) Power Supply...
-
Page 6: General Points
Touch Censor will control the position of the cursor on the screen. The Preh Screen Commander is without a touch surface. Instead of a touch sensor, you will have an anti-reflective, protective glass. In this case you do not have a touch function on the screen. -
Page 7: Contents Of Packing
The Preh Touch / Screen Commander can also be used with optional VESA bracketry for wall mount or pole mount hardware. Pict. 10: Example for adjustable Pict. 11: Example for adjustable Wall mount solution telescope pedestal (pole mount) Contents of packing... -
Page 8: Installation Of Touchscreen
Installation of Touchscreen Please read the following instructions prior to starting to use the Preh Touch / Screen Commander! The following steps are necessary for a correct function of the device: 1 Adjust your computer for the proper video resolution [800x600 / 60 Hz] and switch it off, connect Touch / Screen Commander, switch on computer and Touch / Screen Commander (see chapter 3.2).If you asked for confirming the new... -
Page 9: On Screen Display (Osd)
SELECT. The screen resolution and the refresh rate of the current picture signal is shown in the status display. Menu/Exit Down Select subject to change without prior notice Preh KeyTec GmbH, www.preh-keytec.com 05.2004... - Page 10 OSD returns to the upper menu level.. Submenu DISPLAY ADJUST With this menu the picture geometry and fine tuning can be changed: Pict. 14: Submenu DISPLAY ADJUST 05.2004 subject to change without prior notice Preh KeyTec GmbH, www.preh-keytec.com...
-
Page 11: Horizontal Position
A fine adjustment which might be necessary can be carried out with point PHASE in menu DISPLAY ADJUST. For this fine adjustment you should use either picture "Shutdown Windows“, a test picture or a monitor test program. In the file: \Touch\Montest (CD Rom) you will find a monitor test program for the different operating systems. - Page 12 Consequently the color tone can be adapted to the individual preference of the user. Pict. 15: Submenu COLOR CONTROL Submenu OTHERS Pict. 16: Submenu OTHERS 05.2004 subject to change without prior notice Preh KeyTec GmbH, www.preh-keytec.com...
-
Page 13: Osd H. Position
Should be set to ON. Special Applications could claim the setting OFF. Mechanical Adjustment of the LCD Position The LCD position on a VESA Mount Preh Touch / Screen Commander cannot be changed directly at the Product. The adjustment (tilting or swinging) of the Touch Screen Commander depends on the pole or wall mount hardware used. -
Page 14: Driver Installation
Information for the driver installation is in the file: D:\TOUCH\ELO\README.TXT You can find detailed information in the path, named with your operating system. (The CD-ROM drive of your Preh-CD is here defined with the letter „D“). 05.2004 subject to change without prior notice... -
Page 15: Care
General Points Attention: The Preh Touch / Screen Commander does not contain any electronic components that can be replaced or repaired by the user. Consequently you should not try to do your own repair work. Moreover, you would lose all warranty claims for this product. -
Page 16: Troubleshooting List
RS 232 cable connection incorrect cable connection incorrect touchscreen driver not correctly installed subject to change without prior notice Preh KeyTec GmbH, www.preh-keytec.com Remedy check plug-in connection of power supply switch on the computer check cable connection of VGA connection... -
Page 17: Additional Help
Additional help If you have problems with the connection and the installation of the Preh Touch / Screen Commander, please contact your dealer. You can contact Preh KeyTec Technical Support at: Germany / world wide: Email: support@preh-keytec.de fax: +49 (9771) 92-152... - Page 18 60 Hz/ 800x600 RS232, Mouse Emulation under DOS, Windows 3 x, Windows 9x, NT, 2000 and OS/2 5-wire resistive (AccuTouch) min. 1024x1024 hardcoated polyester foil E271-2210/Smartset 2xx0 35 million actuation subject to change without prior notice Preh KeyTec GmbH, www.preh-keytec.com 05.2004...
-
Page 19: Safety Issues
It it only permitted to use tested / certified power cables H03VV-F.3G, 0.75 and / or better ones. The maximum environment temperature is 40 degrees Celsius 1.000 cycles typical 0°C...40°C -10°C...60°C 10%...90% (at max. 35°C) 700hPa...1060hPa subject to change without prior notice Preh KeyTec GmbH, www.preh-keytec.com 05.2004... -
Page 20: Further Information
This applies especially to unprofessional repair and maintenance jobs. Any claims for damages against the Preh works – no matter for which legal reason – are excluded if no intention and gross negligence can be proved. Above limitation do not apply to claims for damages out of the product liability law. -
Page 21: Fcc Warning Statement
Published from Preh KeyTec GmbH . All rights reserved. Reproduction in any manner, in whole or in part, is strictly prohibited without the written permissin of Preh GmbH . The Information in this document is subject to change without prior notification for the sake of improving reability, design and function.
Need help?
Do you have a question about the MC12T4 and is the answer not in the manual?
Questions and answers