Preh MCI 15 Instruction Sheet

Instruction sheet
DM 02 for MCI 15 T4
Prod. No. 90328-9xx/0800
1

Driver and Configuration

•
This VFD module is communicating via USB using a virtual COM port.
•
Please connect the USB connector and the 12V power bypass as shown in figure 7 / 8.
•
Factory default settings: 115200-8-N-1 running ESC/POS compatible protocol.
•
Manuals and driver software is available here: http://www.preh-keytec.com
2
4
Instruction_sheet_MCI15T4_DM02 subject to change without prior notice
preh-keytec/15/02/2007
Support Touchscreen
3
5
turn page
Page 1 of 2
Instruction sheet
DM 02 for MCI 15 T4
Prod. No. 90328-9xx/0800
6 7
8
The materials used for this module are listed by Underwriters Laboratories (UL).
By assembling of modules to the MCI 15 touchscreen, the whole equipment is not covered by the UL-certification anymore!
Instruction_sheet_MCI15T4_DM02 subject to change without prior notice
preh-keytec/15/02/2007
Page 2 of 2