Bosch GCM18V-12GDCN Operating/Safety Instructions Manual page 42

1609B06757.qxp_GCM18V-12GDC 3/25/20 12:35 PM Page 42
Chop Cuts
WHAT'S A CHOP CUT?
PREPARING FOR CHOP CUT
27
with operation. Before switching "ON",
lower head assembly to make sure clamp
clears guard and head assembly.
dry run with the saw Off by conducting a
simulated cutting cycle, and observe the
projected path of the saw blade. Keep
hands at least six (6) inches (152mm)
away from the projected path of the saw
blade.
42
.800.544.2843
Saw Operations
Use clamping position
that does not interfere
Be aware of the path of
the saw blade. Make a
www.calcert.com
15
10 20
5 25
30
0
MAKING A CHOP CUT
Fig. 42
sales@calcert.com