Bosch GCM18V-12GDCN Operating/Safety Instructions Manual page 4

1609B06757.qxp_GCM18V-12GDC 3/25/20 12:35 PM Page 4
4. Power tool use and care
a. Do not force the power tool. Use the cor-
rect power tool for your application.
b. Do not use the power tool if the switch
does not turn it on and off.
c. Disconnect the plug from the power source
and/or remove the battery pack, if detach-
able, from the power tool before making
any adjustments, changing accessories, or
storing power tools.
d. Store idle power tools out of the reach of
children and do not allow persons unfamil-
iar with the power tool or these instructions
to operate the power tool.
e. Maintain power tools and accessories.
Check for misalignment or binding of mov-
ing parts, breakage of parts and any other
condition that may affect the power tool's
operation. If damaged, have the power tool
repaired before use.
f. Keep cutting tools sharp and clean.
g. Use the power tool, accessories and tool
bits etc. in accordance with these instruc-
tions, taking into account the working con-
ditions and the work to be performed.
h. Keep handles and grasping surfaces dry,
clean and free from oil and grease.
5. Battery tool use and care
a. Recharge only with the charger specified by
the manufacturer.
4
.800.544.2843
General Power Tool Safety Warnings
SAVE THESE INSTRUCTIONS
www.calcert.com
15
10 20
5 25
30
0
b. Use power tools only with specifically des-
ignated battery packs.
c. When battery pack is not in use, keep it
away from other metal objects like paper
clips, coins, keys, nails, screws, or other
small metal objects that can make a con-
nection from one terminal to another.
d. Under abusive conditions, liquid may be
ejected from the battery, avoid contact. If
contact accidentally occurs, flush with
water. If liquid contacts eyes, additionally
seek medical help.
e. Do not use a battery pack or tool that is
damaged or modified.
f. Do not expose a battery pack or tool to fire
or excessive temperature.
g. Follow all charging instructions and do not
charge the battery pack or tool outside the
temperature range specified in the instruc-
tions.
6. Service
a. Have your power tool serviced by a quali-
fied repair person using only identical re-
placement parts.
b. Never service damaged battery packs.
sales@calcert.com