Table of Contents
Advertisement
4.8
Flue options
WARNING: Flue systems
▶ Only use Worcester, Bosch approved flue systems,
no other manufacturer's flue systems have been
approved for use with Worcester appliances.
CAUTION: Non accessible flue systems:
▶ Where a flue system is not going to be accessible,
provision must be made for service and inspection.
▶ Voids containing concealed flues must have at least
one inspection hatch no less than 300mm square.
▶ Flue joints within the void must not be more than 1.5
metres from the edge of the inspection hatch.
▶ Inspection hatches should be located at changes of
direction.
▶ If this is not possible, bends should be viewable from
both directions.
NOTICE: Effective flue lengths:
▶ each 90° bend is equivalent to 2 metres of straight flue
▶ each 45° bend is equivalent to 1 metre of straight flue
Plume management kits are available for the 60/100
horizontal flue system,
Part number 7 716 191 086.
Refer to the manual supplied with the Plume
Management kits for complete installation instructions
Part number
Flue
7 716 191 082
60/100 Telescopic horizontal flue assembly
7 716 191 171
60/100 Longer telescopic horizontal flue
7 733 600 048
60/100 Horizontal high level telescopic flue
7 719 003 702
80/125 Telescopic horizontal flue assembly
7 719 002 430
60/100 Vertical flue assembly
7 719 002 431
80/125 Vertical flue assembly
Table 10 Flue kit part numbers
4.8.1
Flue lengths
The flue systems have different maximum flue lengths
The Greenstar series has the option of two horizontal 60/100 RSF
(telescopic and longer telescopic) and one horizontal 80/125 RSF
(telescopic) flue system and two vertical RSF (60/100 or 80/125) flue
systems:
Refer to the following example Flue options for the maximum flue
lengths.
Horizontal high level flue assembly
Horizontal high level telescopic flue assembly
Table 11
CDi Compact
ErP
- 6 720 813 276 (2015/07)
Description
assembly
kit
60/100 mm
383 mm - 603 mm
130 mm Min
Flue length (mm)
60/100
80/125
202 - 603
N/A
Telescopic horizontal flue assembly
Telescopic horizontal flue assembly
Longer telescopic horizontal flue assembly
Table 12
Extended horizontal flue
Extended horizontal flue
Table 13
Horizontal flue with additional elbow (1 x 90 ° bend)
Horizontal flue with 1 x 90° bend
Table 14
Horizontal flue with additional elbows (2 x 90 ° bends)
Horizontal flue with 2 x 90° bends
Table 15
PRE-INSTALLATION
60/100 mm
350 mm - 570 mm
130 mm Min
Flue length (mm)
60/100
80/125
180 - 570
405 - 600
570 - 790
N/A
Maximum flue length
(mm)
60/100
80/125
6,000
15,000
Maximum flue length
(mm)
60/100
80/125
4,000
13,000
Maximum flue length
(mm)
60/100
80/125
2,000
11,000
19
Advertisement
Table of Contents
