Upgrade Procedure; Obtaining Further Assistance - Polycom V2IU4300T Release Note

Upgrade procedure

2
1) Use a web browser to connect to the V IU appliance
2) Go to Upgrade firmware use page defaults
3) Press "Submit"
4) Follow the progress of the upgrade using the "refresh the upgrade status" link.
5) When the Write process begins, please heed the warning:
WARNING!!! Do not change the configuration or power off the device until the write is 100 percent
complete. The device may become unusable if the write is interrupted.
6) The system will automatically restart after the new image has been loaded. After the
upgrade process has completed, check that the new version number is displayed on the
main System page.

Obtaining Further Assistance

Please contact Polycom Technical Services for assistance.
Page 4 of 4
Polycom RN616.doc