Set Up Intelliflash; Set Up Reverse Intelliflash; Set Up The Confidence And Compliance Beep Interval - Honeywell BW Ultra User Manual

Set Up IntelliFlash™

The IntelliFlash feature causes the detector, if it is in compliance (for example, bump tested and
calibrated), to flash a green light every second (the factory setting default) from the top visual
alarm indicator. In Safety Suite Device Configurator (SSDC), use the IntelliFlash Interval option
in the "Settings" tab to change how often the detector flashes.

Set Up Reverse IntelliFlash™

IntelliFlashflashes a green light when the detector is in compliance, but Reverse IntelliFlash
flashes an amber light when the detector is not in compliance (a bump test or calibration is
overdue, or a sensor is not working and has been overridden).
Use Safety Suite Device Configurator (SSDC) to change how often the detector flashes for
Reverse IntelliFlash.
IntelliFlashand Reverse IntelliFlash can be configured in one of four scenarios:
Scenario 1
When both IntelliFlash and Reverse IntelliFlash are enabled, the detector's green LED will flash
until it goes out of compliance, then its amber LED will flash instead.
Scenario 2
If IntelliFlash is enabled and Reverse IntelliFlash is disabled, the detector's green LED flashes
until it goes out of compliance, then it stops flashing.
Scenario 3
If IntelliFlash is disabled and Reverse IntelliFlash is enabled, neither LED will flash while the
detector is in compliance. The amber LED will flash if it goes out of compliance.
Scenario 4
When both IntelliFlash and Reverse IntelliFlash are disabled, neither LED will flash under any
circumstances.

Set Up the Confidence and Compliance Beep Interval

The Confidence Compliance Beep is a sound that tells the user the detector is in compliance
(for example, bump tested and calibrated). In Safety Suite Device Configurator (SSDC) use the
Confidence/Compliance Beep option to change how often the detector beeps for Confidence
Compliance Beep. Go to the "Settings" tab and scroll down to "Instrument User Preferences".
Check or uncheck the box next to "Confidence Beep".
BW Ultra 27 User Manual