Disposal Of Batteries; Linak ® Application Policy - Linak HOMELINE TD4 Advanced User Manual

Main groups of disposal
Product Metal scrap
TWINDRIVE
Hand controls
Packaging

Disposal of batteries

Details regarding safe disposal of used and leaking batteries:
Batteries should be disposed of in accordance with appropriate federal, state and local regulations� LINAK
recommends that used or leaking batteries are disposed of through the local recycling system� Please do not
dispose of used or leaking batteries as normal household waste or in nature� This will cause damage to the
environment�
How to deal with leaking batteries
Leaking batteries should be disposed of as described above�
If leaking batteries are discovered in the product, the batteries must be removed at once to minimise
damage to the product� If leaking batteries are left in the product, it may become defective�
It is recommended to use plastic gloves when handling leaking batteries� The contents of leaking batteries
can cause chemical burns and respiratory irritation�
If exposed to the contents of a leaking battery, please wash with soap and water� If irritation persists, please
seek medical attention� In case of eye contact, please flush eyes thoroughly with water for 15 minutes and
seek medical attention�
LINAK application policy
®
The purpose of the application policy is to define areas of responsibilities in relation to applying a LINAK
product defined as hardware, software, technical advice, etc� related to an existing or a new customer
application�
LINAK products as defined above are applicable for a wide range of applications within the Medical,
Furniture, Desk, and Industry areas� Yet, LINAK cannot know all the conditions under which LINAK products
will be installed, used, and operated, as each individual application is unique�
The suitability and functionality of the LINAK product and its performance under varying conditions
(application, vibration, load, humidity, temperature, frequency, etc�) can only be verified by testing, and shall
ultimately be the responsibility of the LINAK customer using any LINAK product�
LINAK shall be responsible solely that the LINAK products comply with the specifications set out by LINAK
and it shall be the responsibility of the LINAK customer to ensure that the specific LINAK product can be
used for the application in question�
Cable scrap
x X
Electronics Plastic recycling or
scrap combustion
x
X
TD4 Advanced | 32
Paper and cardboard
recycling
X
x x