Pairing Another Device Later; Quick Pairing Mode; How To Unpair One Twindrive - Linak HOMELINE TD4 Advanced User Manual

Pairing another device later

It is possible to connect another control or another smartphone/tablet to the TWINDRIVE later�
1� Disconnect the TWINDRIVE Advanced from mains�
2� Wait 2 minutes�
3� Reconnect the TWINDRIVE to mains to get it in pairing mode again�
4� Follow the instructions above to pair other devices�
Previously paired devices will not be deleted until a maximum of 8 devices are paired� Pairing a ninth device
will delete the first device paired�
The TWINDRIVE will be in pairing mode every time the system has been out of power and connects
again� To get the system out of pairing mode – simply press any button on an already paired device�

Quick pairing mode

You can also pair a new device by using the quick pairing mode�
1� Turn on the Under Bed Light�
2� Disconnect from mains�
3� Wait until the Under Bed Light turns off�
4� Reconnect the TWINDRIVE to mains to get it in pairing mode again�
5� Press the two top buttons on your hand control at the same time�
6� The Under Bed Light gives a long flash to indicate that control and TWINDRIVE are paired up�

How to unpair one TWINDRIVE

1� Put the TWINDRIVE you want to keep paired into pairing mode and pair the hand control�
2� Press a button on the hand control and the pairing mode stops�
3� The connection between the other TWINDRIVE and the hand control is now deleted�
TD4 Advanced | 24