Table of Contents
Advertisement
2. Periodical check
[2]
[2]
[4]
[2]
[7]
[4]
[6]
[8]
8. To reinstall, reverse the order of removal.
4
[1]
A07VF2C502DA
[3]
[1]
A07VF2C503DA
[5]
[1]
[3]
A07VF2C504DA
Service Manual
Field Service Ver. 2.0 Aug. 2007
4. Remove two C-clips [1] and remove
two bearings [2].
5. Remove the C-clip [1].
6. Slide two roller shafts [2] to the
arrow-marked direction to remove
the pick-up roller /Up [3] and the feed
roller /Up [4].
NOTE
• Reinstalling the pick-up roller and
the feed roller with the blue faces of
the one-way clutches of the pick-up
roller and the feed roller face to the
front.
7. Remove the pick-up roller [1] and the
feed roller [2] from the one-way
clutches [3] and [4].
NOTE
• When reinstalling the pick-up roller
[1], be sure to insert its cutout [5]
over the protrusion [6] of the one-
way clutch [3].
• When reinstalling the feed roller [2],
be sure to insert its cutout [7] over
the protrusion [8] of the one-way
clutch [4].
Y107982-5
Advertisement
Table of Contents
