Mutegil -- Set Mute Status Of Line Inputs As A Group; Mutegim -- Set Mute Status Of Microphone Inputs As A Group - Polycom Vortex EF2280 Programming Manual

8.94. MUTEGIL -- Set Mute Status of Line Inputs as a Group

This command sets the mute status of all the line inputs simultaneously. This is different from using a wildcard, *
with the command because that command sets all the mic and line inputs together, while the MUTEGIL
MUTEI
sets only the line inputs.
This command will generate acknowledgements from each of the line inputs separately.
This command is a boolean command. See
This command is saved to non-volatile memory only as part of a preset. The state of this command will be
restored after power-up only if a preset is saved and that preset is set to be the power-on preset.
Example Description
F01MUTEGIL1 Mute all line inputs.
F01MUTEGIL2 Toggle mute status of all line inputs.
F01MUTEGIL? Query the mute status of all the line inputs.
8.95. MUTEGIM -- Set Mute Status of Microphone Inputs as a
Group
This command sets the mute status of all the microphone inputs simultaneously. This is different from using a
wildcard, * with the
MUTEI
MUTEGIM sets only the mic inputs.
Section 6.1
command because that command sets all the mic and line inputs together, while the
for more information on this type of command.
Status Message
F01MUTEIA1
F01MUTEIB1
F01MUTEIC1
F01MUTEID1
F01MUTEIAa
F01MUTEIBb
F01MUTEICc
F01MUTEIDd ,
where a, b, c, and d reflect the mute status (0 or
1) of each of the line inputs. If this command was
issued after the example above, then the status
messages would be:
F01MUTEIA0
F01MUTEIB0
F01MUTEIC0
F01MUTEID0 .
F01MUTEIAa
F01MUTEIBb
F01MUTEICc
F01MUTEIDd ,
where a, b, c, and d reflect the mute status (0 or
1) of each of the line inputs. If this command was
issued after the example above, then the status
messages would be:
F01MUTEIA0
F01MUTEIB0
F01MUTEIC0
F01MUTEID0 .