Adding Laundry; Cancelling The Programme; Unloading The Laundry; Switching Off The Appli- Ance - Siemens WQ56A4D01W User Manual And Installation Instructions

a The display shows the programme
duration or the "Ready in" time.
a After the programme has ended,
the display shows: "End" .
Note: If "Hot" appears, the appliance
cools the laundry.
When "Hot" goes out, the laundry
has cooled down.
12.7 Adding laundry
After the programme starts, you can
remove or add laundry at any time.
Press ⁠ .
1.
The cooling process starts auto-
matically after approximately 30
seconds and cools down the laun-
dry while the drum is rotating. If
you want to avoid or cancel the
cooling process, open the door.
→ "Display", Page 21
Open the door.
2.
Add or remove laundry.
3.
Close the door.
4.
Press ⁠ .
5.
12.8 Cancelling the pro-
gramme
Press ⁠ .
1.
Open the door.
2.
Remove the laundry.
3.
→ "Unloading the laundry",
Page 31
12.9 Unloading the laundry
Open the door.
1.
Remove the laundry from the
2.
drum.
12.10 Switching off the appli-
ance
Press ⁠ .
▶
12.11 Fluff filter
During drying, fluff from the laundry is
collected in the fluff filter. The fluff fil-
ter protects the appliance from fluff.
Cleaning the fluff filter
If the drying programme has finished
or the display shows a notification
while the appliance is in operation,
clean the fluff filter.
Note: If you do not clean the appli-
ance as described, the appliance's
functionality may be impaired.
Requirements
¡ The display shows the following
after drying: "End"
¡ or the display shows the following
during operation: ⁠ .
Open the door.
1.
Remove the fluff from the door.
2.
Remove the two-part fluff filter.
3.
operation en
31