Advertisement
9.
Use (C) to move the pointer to [YES].
To stop the reset operation, move the
●
pointer to [NO].
10.
Press (A).
After the reset operation is complete, the
watch will return to the current time
screen. The reset operation is complete
when [AC] appears in the lower right
corner of the display.
11.
Press (A) to clear [AC] from the display.
Note
Resetting the watch will also delete
●
information for pairing the watch with a
phone, and unpair them.
Watch Operation Guide 3516
Phone Finder
You can use phone finder to trigger a sound
on the paired phone to help you find it. The
sound operation is performed even if your
phone is in vibrate mode.
Important!
Phone finder will not sound the tone
●
unless the CASIO WATCHES phone
app is running on the phone.
Do not use this function in areas where
●
phone call tones are restricted.
The tone sounds at a high volume. Do
●
not use this function when listening to
phone output over earphones.
1.
Display the current time screen.
Watch Mode
l
2.
Hold down (C) for at least two seconds.
This enters the Control Mode.
3.
Use (C) to select [PHONE FINDER].
4.
Press (A).
This will establish a connection between
the watch and phone, and sound the
phone's ringtone.
It will take a few seconds before the
●
phone tone sounds.
[FAILED] appears when a phone finder
●
operation is unsuccessful.
5.
Press any button to stop the sound.
You can press any watch button to stop
●
the phone tone only during the first 30
seconds after it starts to sound.
Note
Connection with your phone is not
●
possible while the watch's Airplane
Mode is enabled. To connect with your
phone, disable the Airplane Mode.
Entering the Watch Airplane Mode
l
Entering the Watch Airplane
Mode
When you are in a hospital, on an aircraft, or
in any other location where connection with a
phone may cause problems, turn on the
watch's Airplane Mode. To turn off the
Airplane Mode, perform the same operation
again.
1.
Display the current time screen.
Watch Mode
l
2.
Hold down (C) for at least two seconds.
This enters the Control Mode.
3.
Use (C) to select [AIRPLANE MODE].
4.
Press (A).
5.
Use (C) to select an Airplane Mode
setting.
[OFF] Exits Airplane Mode.
[ON]
Enables Airplane Mode.
6.
Press (A) to complete the setting
operation.
After the setting operation is complete, a
check mark appears for a few seconds,
and then the Airplane Mode screen re-
appears.
7.
Press (D) to exit the setting screen.
is displayed while the watch is in the
●
Airplane Mode.
67
Advertisement
