Advertisement
Configuring Notification Sound and
Vibration Settings
1.
Display the current time screen.
Watch Mode
l
2.
Hold down (C) for at least two seconds.
This enters the Control Mode.
3.
Use (C) to select [SETTING].
4.
Press (A).
This displays the setting menu screen.
Pointer
5.
Use (C) to move the pointer to [GENERAL
SETTINGS].
6.
Press (A).
This displays the GENERAL SETTINGS
screen.
7.
Use (C) to move the pointer to [BEEP/
VIBE].
8.
Press (A).
9.
Use (C) to move the pointer to
[NOTIFICATIONS].
10.
Press (A).
Watch Operation Guide 3516
11.
Use (C) to select a notification sound and
vibration settings.
[BEEP+VIBE]
[BEEP]
[VIBE]
[USER]
[OFF]
[USER] setting items can be changed
●
using the CASIO WATCHES phone
app.
12.
Press (A) to complete the setting
operation.
After the setting operation is complete, a
check mark appears for a few seconds,
and then the sound and vibration setting
screen re-appears.
13.
Hold down (D) for at least one second to
return to the current time screen.
Note
If you do not perform any operation for
●
two or three minutes while the setting
screen is displayed, the watch
automatically returns to the current
time screen.
Notification sound on,
notification vibration on
Notification sound on,
notification vibration off
Notification sound off,
notification vibration on
On only for user-specified
setting items
Notification sound off,
notification vibration off
Configuring the Auto Light
Setting
1.
Display the current time screen.
Watch Mode
l
2.
Hold down (C) for at least two seconds.
This enters the Control Mode.
3.
Use (C) to select [SETTING].
4.
Press (A).
This displays the setting menu screen.
Pointer
5.
Use (C) to move the pointer to [GENERAL
SETTINGS].
6.
Press (A).
This displays the GENERAL SETTINGS
screen.
7.
Use (C) to move the pointer to [LIGHT].
8.
Press (A).
9.
Use (C) to move the pointer to [AUTO
LIGHT].
10.
Press (A).
11.
Use (C) to move the pointer to [OFF]
(disabled) or [ON] (enabled).
12.
Press (A) to complete the setting
operation.
After the setting operation is complete, a
check mark appears for a few seconds,
and then the auto light setting screen re-
appears.
13.
Hold down (D) for at least one second to
return to the current time screen.
61
Advertisement
