Casio G-Shock G-Squad DW-H5600-2ER Operation Manual page 62

Specifying the Illumination
Duration
You can select either 1.5 seconds or five
seconds as the illumination duration.
1.
Display the current time screen.
Watch Mode
l
2.
Hold down (C) for at least two seconds.
This enters the Control Mode.
3.
Use (C) to select [SETTING].
4.
Press (A).
This displays the setting menu screen.
Pointer
5.
Use (C) to move the pointer to [GENERAL
SETTINGS].
6.
Press (A).
This displays the GENERAL SETTINGS
screen.
7.
Use (C) to move the pointer to [LIGHT].
8.
Press (A).
9.
Use (C) to move the pointer to
[DURATION].
10.
Press (A).
11.
Press (C) to select an illumination
duration.
[1.5s] 1.5-second illumination
[5.0s] 5-second illumination
Watch Operation Guide 3516
12.
Press (A) to complete the setting
operation.
After the setting operation is complete, a
check mark appears for a few seconds,
and then the illumination duration setting
screen re-appears.
13.
Hold down (D) for at least one second to
return to the current time screen.
Note
If you do not perform any operation for
●
two or three minutes while the setting
screen is displayed, the watch
automatically returns to the current
time screen.
Enabling Power Saving
If you do not plan to use the product for a long
time, you can conserve power by switching to
power saving mode.
1.
Display the current time screen.
Watch Mode
l
2.
Hold down (C) for at least two seconds.
This enters the Control Mode.
3.
Use (C) to select [SETTING].
4.
Press (A).
This displays the setting menu screen.
Pointer
5.
Use (C) to move the pointer to [GENERAL
SETTINGS].
6.
Press (A).
This displays the GENERAL SETTINGS
screen.
62