Polycom EF2201 Brochure & Specs page 38

What's new in InstantDesigner Version 2.0:
The main difference is its ability to help you set up microphone/loudspeaker zones. From a high level perspective, there are two
ways you can use InstantDesigner, depending on whether sound reinforcement is required.
Step 4
Connect Inputs and
Step 5
Create Conference
Step 6
Composer Project
Once the project has been created, it is a simple matter to go into Conference Composer and make any desired final changes to the
system. You can practice (or just play) with the InstantDesigner wizard by downloading Conference Composer from the Polycom
Resource Center. Please refer to the InstantDesigner Release 2.0 Application Note for complete instructions on using this powerful
tool.
36
No Sound Reinforcement
Use Sound
Reinforcement
Select
Devices
Outputs
Select
Step 1
Inputs
Select
Step 2
Outputs
Use Sound
Step 3
Reinforcement
?
Define Zones Step 4
Set Zone
Step 5
Reinforcement Levels
Select
Step 6
Devices
Connect Inputs and
Step 7
Outputs
Create Zone Reports
Step 8
Create Conference
Step 9
Composer Project