Technical Specifications; Compliance - Polycom Vortex EF2201 Reference Manual

T S
ECHNICAL PECIFICATIONS
M S
ECHANICAL PECIFICATIONS
Dimensions
Weight
Connectors
P
OWER
External Power Supply, provided
Input Voltage
Power Consumption
P S
ERFORMANCE PECIFICATIONS
Operating Temperature
Frequency Response
Line Echo Cancellation
Convergence Rate
Cancellation Span
Noise Cancellation
Control Inputs
Status Outputs
C
OMPLIANCE
USA and Canada
NOTE
© Polycom, Inc.
19" (483 mm) W x 9.6" (244 mm) L x 1.75" (45 mm) H (full rack unit)
4 lb. (1.8 kg) dry
5.5 lb. (2.5 kg) shipping
RS-232: DB9F
EF Bus In/Out: RJ45
Phone In/Out: RJ11
Control/Status: DB25F
100 - 250 VAC; 50 - 60 Hz
15 W (typical)
0 to 40 degrees Celsius
250 Hz to 3.6 kHz on telephony interface
40 dB, total 60 dB
30 dB/second
32 ms
0 dB to 15 dB, software selectable
24 Contact closure
20 status outputs, 5V, 20 mA each
The Vortex EF2201 complies with the ITU G.167 Recommendation for AEC, FCC
part 15, and CE requirements.
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that
may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class A dig-
ital device, pursuant to part 15 of the FCC Rules. These limits are designed to pro-
vide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses, and can radi-
ate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications. Opera-
25
T S
ECHNICAL PECIFICATIONS
V EF2201 Reference Manual
ORTEX