Outputs; Matrix Settings - Polycom Vortex EF2201 Reference Manual

O
UTPUTS
Output Settings
Output T
Phone Output
Gain
Mute Output
Delay Enable
Delay
Dynamics
Processing
Figure 11. EF2201
Outputs submenu
M S
ATRIX ETTINGS
Matrix
Main Matrix
Gain
Mute
SubMatrix
Gain
Mute
Figure 12. EF2201
Matrix submenu
© Polycom, Inc.
The O menu contains P
UTPUT
and D P
YNAMICS ROCESSING
Phone Output Gain.
The default setting is 0 dBu. Though the EF2201 allows for positive output gain,
you should always try to adjust input gains to a good level so that the output gain is 0
dB. If you find that you need a positive output gain from the EF2201, first check your
input gain to make sure you are getting a good level (around 0 dB). Keep the output
gain at around 0 dBu.
Mute Output.
Use this to mute or unmute the phone output.
Delay Enable.
Enables delay on Output T to the phone.
Delay.
Sets the amount of delay on Output T.
Dynamics Processing.
The M menu includes gain and mute adjustments for the main matrix (Out T, In
ATRIX
T, In PM0, PM1, WM0, WM1, etc.) and the submatrix (P submatrix, W, X, Y, and Z
submatrices).
19
O G , M
HONE UTPUT AIN
.
Choose the gain applied to the outgoing phone signal.
Enables or disables compression on Output T.
V
ORTEX
LCD M S
ENU TRUCTURE
, D E , D
UTE ELAY NABLE ELAY
EF2201 Reference Manual
,