Table of Contents
Advertisement
Before using the Remote Supervisor II Web interface, read the following
information:
v A Remote Supervisor Adapter II SlimLine must be installed in the server.
v You must have a Web browser to access the Web interface.
v You must know the IP address or the host name of the Remote Supervisor
v The IP address and the host name can be found in the Configuration/Setup
v You can connect directly to the server or use an Ethernet network to access the
v The following cable connections are required:
See the User's Guide on the IBM xSeries Documentation CD for instructions.
36
IBM xSeries 260 Type 8865: Installation Guide
Adapter II SlimLine that you are connecting to.
Utility program or from your network administrator.
service processor and the Remote Supervisor Adapter II Web Interface.
– Crossover cable from the SP connector to a computer.
– An Ethernet cable that is connected to an Ethernet network.
Advertisement
Table of Contents
