Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Lampert PUK 5
Summary of Contents for Lampert PUK 5
- Page 1 Operating manual PUK 5...
- Page 2 REQUIREMENTS” AND "PERSONAL BODY PROTECTION" CHAPTERS MUST BE READ BEFORE COMMISSIONING. Please keep these operating instructions safe. The equipment produced by “Lampert Werktechnik GmbH” fulfils the conformity requirements of the CE mark and is constructed in accordance with the VDE guidelines.
-
Page 3: Table Of Contents
“Note” identifies the product at risk from the hazard and possible damage to the equipment. Important! "Important!" designates user tips and other especially useful information. This is not a signal word for hazardous or dangerous situations. © Lampert Werktechnik GmbH 2017... -
Page 4: Field Of Application
ONLY USE THE SUPPLIED MAINS CABLE! THE PUK5 IS A PIECE OF ELECTRICAL EQUIPMENT. NATIONAL REGULATIONS ON TESTING INTERVALS AND THE SCOPE OF REQUIRED RECURRING SAFETY-RELATED TESTS MUST BE OBSERVED. © Lampert Werktechnik GmbH 2017... -
Page 5: Hazards Of Shielding Gas Cylinders
The Lampert eye protection systems with its integrated Particular regulations apply to fire and explosion LCD protective welding screen offers reliable protection endangered spaces. -
Page 6: Description Of The Rear Of The Device
(3) on the rear of the PUK welding WARNING! ONLY SUITABLE ORIGINAL EYE PROTECTION OTHER EYE PROTECTION SYSTEMS ARE NOT SYSTEMS FROM LAMPERT MAY BE APPROVED AND CAN LEAD TO PERMANENT HEALTH CONNECTED TO THE WELDING SYSTEM! DAMAGE OR DAMAGE TO THE WELDING DEVICE. -
Page 7: Inserting The Electrodes Into The Hand Piece
You also have the support the microscope on your option of changing the angle of inclination for the working surface. microscope. In order to do so, release the locking screw © Lampert Werktechnik GmbH 2017... -
Page 8: Personal Body Protection And Hazards
(It jumps back to power automatically after 1 second) • Turning the controller to the left or the right changes the selected parameter. • Pressing the controller for a longer time (> 1 second) switches to the next user level, see chapter 5.2. © Lampert Werktechnik GmbH 2017... -
Page 9: Description Of Menu Items
Fixation welding (if activated in the settings) PRESSING THE SELECTED MATERIAL (27) IN THE TOP OF THE DISPLAY FOR 2 SEC. CAUSES THE PROGRAMMING MENU TO BE LAUNCHED: © Lampert Werktechnik GmbH 2017... -
Page 10: Switching On The Device
• Expert Menü: The expert menu can be activated appears as an additional user level. The user levels can here. If this menu is active, it be toggled by pressing the rotary controller for 1 sec. © Lampert Werktechnik GmbH 2017... -
Page 11: Selection Of The Welding Parameters And User Levels
20 % or % are only practical in the most unusual circumstances. with very fine welding, even lower. There is a danger of inhomogeneous welds and only experienced users should move outside this range. © Lampert Werktechnik GmbH 2017... -
Page 12: Selection Of The Welding Parameters
In The start level shows in addition to the welding is always the same for each of the preconfigured power and pulse duration for each stored material also materials. the recommended working range in the respective scales of the touchscreen, highlighted in colour. © Lampert Werktechnik GmbH 2017... -
Page 13: Expert Menu
(2 seconds) calls button. Saved data programming cannot be deleted. It menu. In the first step, only scroll/slide overwritten. left/right to select the program slot into which you want to store your custom settings. © Lampert Werktechnik GmbH 2017... -
Page 14: Loading Saved Programs
The shielding gas supply stops or the welding process • The welding protection filter is darkened is started again by touching the workpiece. • The arc is triggered with a slight delay and the electrode partly withdraws into the hand piece. © Lampert Werktechnik GmbH 2017... -
Page 15: Welding With The Smoothing Mode
AFTER WELDING HAS BEEN SUCCESSFULLY COMPLETED, AND BEFORE SWITCHING TO ANOTHER USER LEVEL, PLEASE REMOVE THE BLUE CONNECTION CABLE! NOTE: DURING FIXATION WELDING, THE FOOT SWITCH IS ALWAYS ACTIVE, AND CANNOT BE DEACTIVATED! DURING FIXATION WELDING THE GAS PROTECTION IS DEACTIVATED! © Lampert Werktechnik GmbH 2017... -
Page 16: Basics And Tips
IF FUSES REQUIRE EXCHANGING, THEN THEY MUST BE REPLACED WITH FUSES OF THE SAME TYPES AND VALUES. THE GUARANTEE IS VOID IN THE EVENT OF EXCESSIVLY HIGH FUSING! THE DEVICE MAY ONLY BE OPENED BY A QUALIFIED ELECTRICIAN! © Lampert Werktechnik GmbH 2017... -
Page 17: Technical Data
3 W / 800 mA Protection class Insulation class Protection type IP 20 Weight 3.5 Kg 9.3 OPTICAL DATA MICROSCOPE Lens Ocular 10 x Working distance 140 mm Magnification factor 10 x Field of view 20 mm © Lampert Werktechnik GmbH 2017... -
Page 18: Type Plate
Tungsten No-load Voltage at Mains voltage inert gas voltage nominal load welding Power Power Nominal consumption consumption Earthing welding under max. under current load nominal load Cyclic Single-phase Keep away duration transformer from water factor © Lampert Werktechnik GmbH 2017... -
Page 19: Warning Notices
Tungsten inclusions in base Excessive pressure of the electrodes Touch workpiece with extremely light material on the workpiece pressure. Tungsten electrode welds to Excessive pressure of the electrodes Touch workpiece with extremely light workpiece on the workpiece pressure. © Lampert Werktechnik GmbH 2017... -
Page 20: Microscope
If the PUK5 or the stereo microscope should require a recommend to first contact your dealer or an authorized repair or adjustment by qualified personnel, we always customer service. WARNING: THE DEVICE MAY ONLY BE OPENED BY A QUALIFIED ENGINEER! © Lampert Werktechnik GmbH 2017... -
Page 21: Spare Parts List
2012/19/EU regarding the disposal of 13. EC-DECLARATION OF CONFORMITY Please find enclosed to this shipment the separate document – Declaration of Conformity. Text and illustrations represent the technical status at the time of printing. Subject to change. © Lampert Werktechnik GmbH 2017... - Page 22 WORKSHOP NEWS You are interested in the possibilities of use of our fine-welding devices? Or you are searching for one or another tip on working with your PUK? Then just sign up for our newsletter on www.lampert.info! VISIT OUR SHOWROOM! Our video library is showing many applications from everyday goldsmith activities, our photo gallery various examples of use.
- Page 23 Born in Germany. Lampert Werktechnik GmbH Ettlebener Straße 27 D-97440 Werneck Tel. +49.9722.9459-0 mail@lampert.info www.lampert.info • • • • •...
Need help?
Do you have a question about the PUK 5 and is the answer not in the manual?
Questions and answers