Advertisement
- Removal of the Rotary Tray
- Removal of the Open Lock Gear
- Removal of the Close Lock Gear
- Removal of the Tray Motor P.C.B. and Sensor P.C.B.
- Removal of the CD Traverse Unit
- Removal of the Pulley Gear
- Removal of the Loading Motor P.C.B.
- Removal of the Drive Gear (A) & (B)
- Disassembling the Fixed Plate, Magnet and Clamper
- Removal of the Cam Gear & Support Piece
- Removal of the Slide Plate (L) & (R) and Change Lever
- Assembly of Tray Base
15.1. Disassembling the Top Cabinet
Step 1 Remove 7 screws.
Step 2 Remove the top cabinet in the direction of arrow.
15.2. Disassembling the Front Panel
- Follow the (Step 1) - (Step 2) of Item 15.1.
Step 1 Pull out the FFC from connectors (CN6004 & CN6001).
Step 2 Remove 1 screw.
36
Advertisement
