Advertisement
activated.)
Note:
The following buttons are invalid and the player displays "___LOCKED_" while the lock function
mode is entered.
9.8.2. Exiting Lock Function
While the lock function is activated, press the buttons which are used to enter the mode.
("___LOCKED_" appears for one second, and then "_UNLOCKED_" appears. (After this, the
lock function is deactivated.)
9.9. Things to Do After Repair
Follow the procedure described below after repair.
1. While the power is on, press the button to close the tray.
2. Press the power button to turn off the power.
3. Unplug the power cable.
Note:
It is prohibited to unplug the power cable while the tray is opened and to close the tray manually.
10. Cautions To Be Taken During Servicing
10.1. Recovery after the dvd player is repaired
- When FLASH ROM or Module (2) P.C.B. is replaced, carry out the
recovery processing to optimize the drive. Playback the recovery
disc to process the recovery automatically.
- Recovery disc (Product number=RFKZD03R004)
- Performing recovery
1. Load the recovery disc (Product number: RFKZD03R004) to the
player and run it.
2. Recovery is performed automatically. When it is finished, a
message appears on the screen.
3. Remove the recovery disc.
4. Turn off the power.
22
Advertisement
