Advertisement
Item
Player mode
and button
combination
Error code
In STOP
check
mode, press
"PAUSE" and
"OPEN/
CLOSE"
buttons on
the player,
and "0"
button on the
remote
control unit. *
With pointing
of cursor up
and down on
display, the
panel
controller
switches
serial number
of history and
sends out the
command
accordingly.
Initial setting
In STOP
of laser
mode, press
drive current
"PAUSE" and
"OPEN/
CLOSE"
buttons on
the player,
and "PAUSE"
button on the
remote
control unit.
Function
Error code check.
The latest error code
stored in EEPROM is
displayed.
Initial setting of laser drive
current initial current value
for each of DVD laser and
CD laser is separately
saved in EEPROM.
17
Display
Error code (play_err) is express
in the following convention:-
Error code=0 x DAXX is expressd
:
nn UXX
Error code= 0 x BDXX is
expressed:
nn HXX
Error code= 0 x DXXX is
expressed:
nn FXXX
Error code= 0 x 0000 is
expressed:
nn F- - -
*"nn" denotes the serial number
of history.
The value denotes the current in
decimal notation. The above
example shows the initial
current is 34mA and 28mA for
DVD laser and CD laser
respectively when the laser is
switched on.
You may have to press "FL-
SELECT" on remote control to
veiw remaining text due to FL
display not able to display full
length.
Cancellation
method
Cancelled
automatically
5 seconds
later
Cancelled
automatically
5 seconds
later.
Advertisement
