Installing The Canopy; Installing The Blades - Hunter Devon Park Installation Manual

1886
Insert grommets found in the
holes in the blades, then secure each blade to a blade arm
with screws found in the hardware bag.
Repeat x5
7
Ceiling Bracket Downrod

Installing the Canopy

Lift the canopy into place so that
the screw holes are aligned.

Installing the Blades:

hardware bag into the
Hanging Fan Wiring
Insert the two canopy screws
found in the hardware bag.
Lightly attach the blade arms to the motor with
the blade arm screws, then securely tighten
after both screws are attached.
Note:
Fan style may vary.
Canopy Blades
x2
Canopy Screw
bag
x15
Blade Screw
bag
Grommet
bag
Remember the screws that you
kept after removing the shipping
blocks? You need them here.
x5
Blade Arm Screw
bag
Repeat x5
Light Remote Troubleshooting
x15