Table of Contents
Advertisement
1886
You probably bought this fan with a location in mind. Let's check below to make sure it is a good fit.
Check the room dimensions:
30 inches
from blade tip to
nearest wall or
obstruction
from bottom edge
of blade to the
Standard Mounting
Support Structure
If you have a flat ceiling:
Hang your fan by a standard downrod. Some fans come
with a shorter downrod for a Low Profile installation.
A little more information on Angled Mounting:
For optimum performance and appearance, a longer downrod should
be used with your Hunter ceiling fan when installing on high or angled
ceiling. If your ceiling is angled greater than 34° you will also need an
Angled Mounting Kit. Longer downrods and the Angled Mounting Kit are
sold separately at HunterFan.com.
Hunter Pro Tip:
Determining if you need an Angled Mounting Kit:
Fold on the dotted line. Place against edge againts
the wall. Slide towards the ceiling.
If the guide touches the wall but not the ceiling, you
need an angled mounting kit.
34°
WALL
3
Choosing the Right Installation Location
7 feet
floor
Checking the Ceiling Angle:
Ceiling
Outlet Box
(required)
Angled Mounting
Check the outlet box:
You must be able to
secure the fan to building
structure or fan-rated
outlet box.
If you have an angled or vaulted ceiling:
1.
You will need a longer downrod. (sold separately at HunterFan.com)
2.
If your ceiling angle is greater than 34°, you will also need an
Angled Mounting Kit. (Sold separately at HunterFan.com)
Support
Structure
Ceiling
Outlet Box
(required)
Advertisement
Table of Contents
