68
4. When complete, flip DIP switch six (6) to its original (OFF) position. This will return the appliance to normal mode.
5. Allow appliance to operate normally. Ensure it is operating properly.
6. Reinstall the appliance front cover.
7. Use a Phillips Head screwdriver to reinstall the appliance top cover.
*In order to increase CO
values on high fire, the gas orifice size can be increased to achieve the maximum CO
value listed in Table
2
2
27. Contact the factory for recommended orifice sizes to achieve the desired setting.
WHL-012 REV. 4.8.16