Ryobi P711 Operator's Manual

Ryobi P711 Operator's Manual

18v cordless dry hand vac

Advertisement

Your hand vac has been engineered and manufactured to our high standard for dependability, ease of operation, and
operator safety. When properly cared for, it will give you years of rugged, trouble-free performance.
WARNING:
To reduce the risk of injury, the user must read and understand the operator's manual before using
this product.
Thank you for your purchase.
SAVE THIS MANUAL FOR FUTURE REFERENCE
OPERATOR'S MANUAL
18V CORDLESS DRY HAND VAC
P711
BATTERIES AND CHARGERS
SOLD SEPARATELY
This hand vac is intended for household
use only.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the P711 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Ryobi P711

  • Page 1 OPERATOR’S MANUAL 18V CORDLESS DRY HAND VAC P711 BATTERIES AND CHARGERS SOLD SEPARATELY This hand vac is intended for household use only. Your hand vac has been engineered and manufactured to our high standard for dependability, ease of operation, and operator safety.
  • Page 2: Table Of Contents

    The replacement power tool will be covered by the limited warranty for the balance of the two year period from the date of the original purchase. WHAT THIS WARRANTY COVERS: This warranty covers all defects in workmanship or materials in your RYOBI power ®...
  • Page 3: Important Safety Instructions

     Do not overreach. Keep proper footing and balance at all times. Proper footing and balance enables better MODEL BATTERY PACK (P100) CHARGER (P110) control of the hand vac in unexpected situations. Do not P711 130255004 1423701, 140237021 use on a ladder or unstable support.
  • Page 4 IMPORTANT SAFETY INSTRUCTIONS (CONT.) BATTERY PACK REMOVAL AND WARNING: PREPARATION FOR RECYCLING To preserve natural resources, please Upon removal, cover the battery pack’s terminals with re c yc l e o r di s po s e o f b a tte ri e s heavy-duty adhesive tape.
  • Page 5 IMPORTANT SAFETY INSTRUCTIONS (CONT.)  Check for misalignment or binding of moving parts,  When servicing a hand vac, use only identical breakage of parts, and any other condition that may replacement parts. Follow instructions in the affect the hand vac’s operation. If damaged, have the Maintenance section of this manual.
  • Page 6: Symbols

    SYMBOLS Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to operate the product better and safer. SYMBOL NAME DESIGNATION/EXPLANATION Volts Voltage Amperes Current Hertz Frequency (cycles per second)
  • Page 7: Symbols

    AUTHORIZED SERVICE CENTER for repair. When understand completely the operator’s manual. If you servicing, use only identical replacement parts. do not understand the warnings and instructions in the operator’s manual, do not use this product. Call Ryobi customer service for assistance.
  • Page 8: Features

    FEATURES PRODUCT SPECIFICATIONS Motor ..................................18V DC Charger Input ............................120 V, 60 Hz, AC only Charge Rate .................................1 Hour DUST BOWL RELEASE BUTTON BRUSH DUST BOWL ON/OFF ATTACHMENT SWITCH HANDLE CREVICE TOOL Fig. 1 KNOW YOUR DRY HAND VAC CREVICE TOOL See Figure 1.
  • Page 9: Assembly

    ASSEMBLY UNPACKING WARNING: This product has been shipped completely assembled.  Carefully remove the product and any accessories from If any parts are damaged or missing do not operate the box. Make sure that all items listed in the packing list this product until the parts are replaced.
  • Page 10: Operation

    OPERATION CHARGING A COOL BATTERY PACK WARNING: If battery pack is within normal temperature range, the red LED on charger will come on. Do not allow familiarity with the product to make you NOTE: If the charger does not charge the battery pack careless.
  • Page 11 OPERATION CHARGING A HOT BATTERY PACK P100 BATTERY When using the product continuously, the batteries in the PACK battery pack will become hot. You should let a hot battery pack cool down for approximately 30 minutes before P110 CHARGER attempting to recharge. When the battery pack becomes discharged and is hot, this will cause the green LED to come on instead of the red LED.
  • Page 12: Maintenance

    OPERATION ADDING ATTACHMENTS See Figures 5 - 6. The brush attachment and crevice tool attachments can be easily snapped into place on the hand vac. TO INSTALL  Turn off the vacuum.  Insert the attachment into the front end of the vacuum dust bowl, making sure the attachment is firmly snapped into place.
  • Page 13 MAINTENANCE CLEANING THE HAND VAC PRESS RELEASE BUTTON See Figures 7 - 9. The dust bowl should be checked, emptied, and cleaned periodically to obtain maximum dust collection. REMOVING THE DUST BOWL See Figure 7.  Remove the battery pack from the vacuum. ...
  • Page 14: Parts And Service

    HOW TO OBTAIN CUSTOMER OR TECHNICAL SUPPORT: To obtain Customer or Technical Support please contact us at 1-800-525-2579. RYOBI is a registered trademark of Ryobi Limited used under license. ® ONE WORLD TECHNOLOGIES, INC. 1428 Pearman Dairy Road, Anderson, SC 29625 Phone 1-800-525-2579 www.ryobitools.com...

Table of Contents

Save PDF