Bosch GLM100-23 Operating/Safety Instructions Manual page 16

Rounding Results / Changing Product Accuracy Displayed
CLICK Rounding Button to change the accuracy of the tool
once a measurement unit type is picked (tools can cycle from
1/32 to 1/2). Only applicable in fraction mode. Once a unit
type and accuracy are selected, it will show on the top of the
screen for quick reference (c).
160992A6EZ GLM100-23 202210.indd 16
Press the "On/Off (measuring)" button 1
once more to switch the laser on again. The
laser indicator
The continuously updated/current
measuring value is displayed.
"ERROR" occurs when trying to hold a
measurement that is out of range or
measurement cannot be read correctly by
tool.
c
-16-
flashes on the display.
10/4/22 10:19 AM