Sidestand; Ignition Circuit Cut-Off System - Yamaha FJR1300AS 2017 Owner's Manual

Table of Contents

Advertisement

Sidestand

The sidestand is located on the left
side of the frame. Raise the sidestand
or lower it with your foot while holding
the vehicle upright.
TIP
 The built-in sidestand switch is
part of the ignition circuit cut-off
system, which cuts the ignition in
certain situations. (See the follow-
ing section for an explanation of
the ignition circuit cut-off system.)
 The sidestand switch is also part
of the YCC-S system. Shifting out
of neutral is impossible when the
sidestand is down.
WARNING
The vehicle must not be ridden with
the sidestand down, or if the side-
stand cannot be properly moved up
(or does not stay up), otherwise the
sidestand could contact the ground
and distract the operator, resulting
in a possible loss of control.
Yamaha's ignition circuit cut-off
system has been designed to assist
the operator in fulfilling the respon-
sibility of raising the sidestand be-
fore starting off. Therefore, check
this system regularly and have a
Yamaha dealer repair it if it does not
function properly.
Instrument and control functions
EAU55592

Ignition circuit cut-off system

The ignition circuit cut-off system
(comprising the sidestand switch and
brake light switches) has the following
functions.
Periodically check the operation of the
ignition circuit cut-off system accord-
ing to the following procedure.
EWA10242
3-47
 It prevents starting when the side-
stand is up, but neither brake is
applied.
 It prevents starting when either
brake is applied, but the sidestand
is still down.
 It cuts the running engine when
the sidestand is moved down.
EAU68771
3

Advertisement

Table of Contents
loading

Table of Contents