Yamaha FJR1300AS 2017 Owner's Manual page 50

Instrument and control functions
1. Rider seat holder cover
3
4. Install the rider seat height posi-
tion adjuster so that the "H" mark
is aligned with the match mark.
1
1. Rider seat height position adjuster
2. "H" mark
3. Match mark
5. Insert the projection on the front of
the rider seat into seat holder B as
shown.
1. Projection
2. Seat holder B (for high position)
3. Rider seat holder cover
6. Align the projection on the bottom
of the rider seat with the "H" posi-
tion slot, and then push the rear of
the seat down to lock it in place as
shown.
1
1. "H" position slot
7. Install the passenger seat.
To change the rider seat height to
2
the low position
1. Remove the rider seat. (See page
3-34.)
H L
3 2. Remove the rider seat height posi-
tion adjuster by pulling it upward.
3. Move the rider seat holder cover
to the upper position.
4. Install the rider seat height posi-
tion adjuster so that the "L" mark
is aligned with the match mark.
1
1. Rider seat height position adjuster
2. "L" mark
3. Match mark
3-36
2
H L
3