Instrument and control functions
Selecting the information display
1
2
GEAR
N
A.TEMP
˚C
25
C.TEMP
˚C
Lo
TIME TRIP
0:06
3
1. Information display
2. Display–1
3. Display–2
4. Display–3
There are 3 information displays. The
selected information display can be
switched by pushing the select switch.
The following items are shown in the
information displays:
an odometer display
tripmeter displays
a fuel reserve tripmeter display
an estimated traveling range dis-
play
an elapsed time display
an ambient temperature display
a coolant temperature display
an average fuel consumption dis-
play
an instantaneous fuel consump-
tion display
The items shown in each information
display can be selected.
To set or select the items shown, see
page 3-17.
Odometer display:
ODO
GEAR
3
N
TRIP-1
km
5.0
TRIP-2
km
7.0
ODO
km
20
GEAR
N
RANGE
11
FUEL AVG
12.3
CRNT FUEL
12.3
km
20
The odometer shows the total distance
traveled by the vehicle.
Tripmeter displays:
4
TRIP-1
km
km/L
km/L
TRIP-2
"TRIP-1" and "TRIP-2" show the dis-
tance traveled since they were last set
to zero.
TIP
The odometer will lock at 999999.
The tripmeters will reset and con-
tinue counting after 9999.9 is
reached.
When approximately 5.5 L (1.45 US
gal, 1.21 Imp.gal) of fuel remains in the
fuel tank, the last segment of the fuel
meter starts flashing. In addition, the
information display will automatically
change to the fuel reserve tripmeter
mode "TRIP-F" and start counting the
distance traveled from that point.
TRIP-F
3-14
km
5.0
km
7.0
GEAR
4
km
3.4